Honeywell N-1000-iv-x 4 Reader Controller With Lockable Enclosure And Tamper

Honeywell N-1000-IV Expanded 4 Reader Controller with Lockable Enclosure and Tamper Switch

Versatile, reliable and expandable. The three main components delivered with every N-1000 make it the most popular access control panel ever. A key feature of the N-1000 includes its completely distributed database. All card information, time zone information, relay control information and alarm point information is loaded into the N-1000`s memory. The unit will operate completely stand-alone with no dependence on any other equipment. The most important feature of any access control system is the ability to be expanded. The N-1000 will operate as a stand-alone two or four door controller, and as needs increase up to 31 N-1000`s may be connected on an RS-485 dropline (63 using 20mA current loop). Using WIN-PAK access control software, a total system is achieved by having each drop-line connected to a communication port, modem or ethernet terminal server.The N-1000-IV is designed to operate off-line, making access control decisions independently from a PC or other controlling device. It can also be connected to a host computer for system configuration, alarm monitoring and direct control. Connectivity to the host computer is accomplished via direct serial communication (RS-232 or RS-485), dial-up modem or TCP/IP network connection.The N-1000-IV-X allows for a card database of 25,000 cards and a transaction buffer capable of storing 6,600 transactions.

Features

·         4 reader control panel (N-1000-IV)

·         Supports all major reader technologies and 16-digit ABA card formats

·         Distributed database for independent operation

·         Operates in remote site configurations with dial-up (requires M-9600-2 and N-485-HUB-2) or leased lines

·         N-1000-IV-X: 25,000 card memory N-1000-IV: 5,000 card memory

·         N-1000-IV-X: 6,600 buffers N-1000-IV: 10,200 buffers

·         RS-485 and 20 mA communications are jumper selectable

·         Compatible with the N-1000-II

·         16 supervised alarm inputs. Separate inputs for tamper switch and primary power fail monitoring

·         DPDT Form C relays; 4 on N-1000-III/IV, 8 on N-1000-III/IV-X

·         63 time zones to control card access, relays and alarm points

·         Relays are "time-programmable" for automatic control

·         12 VDC Battery Backup

·         12 VDC, 500 mA output for Reader/IR devices

·         8 programmable card formats supported

·         Preassembled, hinged, locking enclosure with battery and toggle switch

Honeywell N-1000-iv-x 4 Reader Controller With Lockable Enclosure And Tamper